During the investigation for rising damp, our expert surveyors will inspect your property for any sources of water ingress. To help customers reduce sources of water ingress and subsequently rising damp, at Warm Wall, we have devised a guide for customers to carry out a damp survey within their property.
Warm Wall advises customers take great care when conducting any survey and use proper equipment. To rid your property of damp, you will need to ensure that all moisture including condensation is eradicated from your property before the investigation can begin. This will help the investigation a great deal and will allow our surveyors to correctly identify the cause behind the rising damp within your property and work out the exact source of water ingress.
A Guide To Survey Procedures
This will inspect the following:
- Construction of walls and inspection of cracks in masonry, copings and more
- Position and condition of air vents
- External valleys and flat roofs
- Brickwork, mortar, stone, render conditional
- Condition of external timbers
- Chimneys and flashings
- Condition of any remedial DPC installations and integrity of this system
Primary Internal Examination
This will be a preliminary inspection inside your property checking for the following:
- Growth of mould and stains from mould
- Presence of damp, wet patches, water droplets and stains
- Wallpaper peeling or decaying paintwork
- Decay and rotting of skirting boards and timber in the household
- Secondary Internal Examination
- Using a proper functioning calibrated electrical moisture meter, we will check:
- Perimeter of solid/timber suspended floors
- Moisture content of timber skirting from the base and top
- Inspect the condition of all floors/wall junctions
- Inspect all DPC installations
- Check moisture meter reading horizontally and vertically on all wall surfaces
- Inspect for efflorescence behind wallpapering
- Note the use of foil and polystyrene sheets behind walls, new plasterwork and the condition it is in
- Examine floorboards and check the condition of the timbers
- Ensure floor ventilation is of suitable levels
- Inspect for internal plumbing defects like dripping water pipes
- If possible, we will check the history of your property for previous faults and what the property was previously used for before your tenancy.
- Our inspectors will inspect the lifestyle of the property inhabitants and factors like use of heating, ventilation, cooking and more.
Once our inspectors have correctly identified the type of damp within your property, we will then put forward a program for works that will help to remedy the problem at hand. We advise our customers not to leave any problems with damp for too long as this could lead to rot within your home.
Investigation and elimination will help in the task of finding the source of rising damp within your home. We advise customers to take care within the winter months as condensation is a common cause of rising damp, and it can be avoided easily.
If you would like more information about our services, do not hesitate to contact Warm Wall today. We provide our damp proof treatment in the following areas: Bournemouth, Poole, Dorset, Hampshire, Southampton, Portsmouth and the surrounding areas.